Maintenance of aluminum alloy doors and windows
1. Pushing and pulling nature
When using aluminum alloy doors and windows, the action should be light, and push and pull should be natural; Do not forcefully pull or push when encountering difficulties, but first troubleshoot the problem.
2. Remove accumulated dust
Ash accumulation and deformation are the main reasons for the difficulty in pushing out new aluminum alloy doors and windows. It is necessary to keep the door frame clean, especially the cleanliness of the sliding groove. A vacuum cleaner can be used to remove the accumulated dust from the groove and the door sealing strip. When cleaning aluminum alloy doors and windows, do not step on the aluminum frame or pull on the frame as a support.
3. Remove accumulated water
After a rainy day, wipe dry the wet glass and door and window frames in a timely manner, and pay special attention to wiping out the accumulated water in the sliding groove. If the chute is used for a long time, the friction force will increase. You can add a little engine oil or apply a layer of wax oil.
4. Cleaning methods
Aluminum alloy doors and windows can be dipped in clean water or neutral detergent with a soft cloth. Do not use ordinary soap and laundry detergent, and do not use strong acid and alkali cleaning agents such as detergent and toilet detergent.
5. Regular inspection
Regularly inspect the joint of aluminum alloy frame and wall. If it becomes loose over time, it can easily cause the overall deformation of the frame, making it impossible to close and seal the doors and windows. So if the screws at the connection are loose, they should be tightened immediately. If the screw base is loose, a small amount of cement should be mixed with epoxy strong adhesive to seal it.